APC (Schneider)

APC BX650CI-CN

¥544.50

Output Power Capacity	390 Wattage/650 VA
rated Output Voltage	230V
Output Rate ( and Main Rate Sync)	47 - 63Hz
Topology	Standby
waveform Class	sine wave step-by-step approximation
Output connection	(3) Chinese outlet ( Standby Battery)

APC BX650CI-CN Input

rated Input voltage	230V
Input Rate	45 - 65Hz
Input terminal class	Australian/Chinese
Input line length	1.22 m
Operating Voltage range	140 - 300V
maximum Input Current	7A
Input Circuit Breaker capacity	7.0 A

control Panel	LED status display "online", "Battery on"
with Alarma	Utility Power Alarm in case of blackout: Especially low Battery Alarm overload continuous tone alarm

Battery No.	Maintenance-free sealed Lead-acid Battery (suspended electrolyte): leak-proof
charging time	8 h

curve fitting measured run time data. All with measurements were carried out using a fully charged new Battery, under typical ambient conditions and without with Power Input and Resistor Load Output.

data line protection	RJ-11 Modem/Fax/DSL (Modulation and Demodulation Unit/Fax/Direct Fast Link-Circuit-Circuit Unit) Protection (Dual Line Single -Circuit)
surge suppression energy	273 Joule

working environment	0 - 40°C
working relative humidity	0 - 95%
Operation Height	0-900 m
storage temperature	-15 - 45°C
audible noise 1 m from the surface of the Standby	45.00 dBA